Efficient Operational Design

Flexible design allows for efficient installation, internally or externally
Only requires a small 240v power supply
Copeland scroll compressor technology
Twin motor fan configuration
Designed For Rental

The unit incorporates all required rental features - ready to rent
Includes: fork pockets, easy move castors, simple ducting/power connections

Proven Technology

Proven unit design with 5 years operational experience
40 years of manufacturing history
Investment Return

Quick payback on investment, based on achievable weekly rates
High utilisation due to internal/external positioning & air-conditioning/heating capability
Strong potential for ancillaries revenue
Technical Specification
PERFORMANCE
 
MODEL NUMBER:
 enviromax 10
 
COOLING:
 10.1 kW Nominal* (Internal Spec)
 
HEATING:
 10 kW Nominal* (Internal Spec)
 
DE-HUMIDIFICATION:
 180 Litres/24HRS **
 
 
ELEC SUPPLY:
 220V/240V –16 amp (Cee-form) connection
 
RUNNING AMPS:
 12 to 14.5 amps ambient temp dependent
 
HEIGHT:
 1465mm
 
LENGTH:
 1080mm
 
WIDTH:
 735mm
 
WEIGHT:
 175Kg
 
HANDLING:
 Fork Pockets and Easy-Move castor’s
 
SOUND LEVEL:
 52 dba @ 5 metres
 
SUPPLY AIR FLOW:
 1,450 Cubic m/hour
 
 
CONFIGURATION
 
SUPPLY AIR:
 Free blow via grill OR 2 x 300mm dia ducts (20m max)
 
CONDENSER AIR:
 1 x 600mm dia duct or 2 x 300mm dia ducts (5m max)
 
RETURN AIR:
 1 x 600mm dia duct-optional (5m max)
 
 
CONTROLLER:
 Unit mounted or optional 24 Volt remote controller / thermostat. Unit is supplied with integral controller for A-C, Heating and basic De-Humidifcation operation. (temperature based set-point for DH**).
 

Specifications are based on Enviromax standard test conditions. Nominal* operating condition is a 12 to 30 deg C db ambient operating temperature range, with a 240V/50HZ power supply (output capacity will vary in relation to operating wet bulb temperature and Relative Humidity conditions, higher ambient conditions will increase the running amps).
**(20 deg C db/75% RH) Optional D-H Controller is required for De-Humidification operation where close control is required on RH.